Parmenion

Cmnd_Alias URPMI = /usr/bin/urpmi.update, /usr/sbin/urpmi.addmedia, /usr/sbin/urpmi.update, /usr/sbin/urpmi, /usr/sbin/urpmi.removemedia
%wheel  ALL =   PASSWD: ALL, NOPASSWD: URPMI
(j’en avais assez de rentrer mon mot de passe \o/ )

J’ai été confronté ce matin a cette petite erreur  joyeusement fourni par k3b…J’avais déja rencontré le problème par le passé sous 2008.1 en utilisant les kernels tmb, mais je n’y avais pas prêté attention étant donné que j’avais opté pour graver alors sur l’imac de madame. Là j’ai fait un peu de recherche sur google et j’ai fini par trouver la solution.
Initialement il est fait mention de problème rencontré essentiellement avec des chipsets intel une vague histoire de drivers pata/sata interrogeant simultanément un périphérique donné, une solution proposée est donc de passer un argument supplémentaire au kernel a savoir combined_mode=libata étant donné que le kernel de mandriva (2.6.26.1-desktop-1mnb) a switcher sur la libata pour un certain nombre de matériels. Après reboot, le problème persistant un petit lsmod m’a montré que ide_generic était toujours chargé (et donc potentiellement capable de créer des conflits), j’ai donc opté pour une solution un peu plus radicale a savoir regénérer mon initrd *sans* le support des modules ide

mkinitrd /boot/initrd-2.6.26.1-desktop-1mnb.img 2.6.26.1-desktop-1mnb –omit-ide-modules -f -v

un reboot et le tour était joué, je pouvais de nouveau

Pour google :

[root@epiche mikala]# dmesg
Linux version 2.6.26.1-desktop-1mnb (herton@build1.conectiva) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP Sat Aug 2 01:48:56 BRT 2008
PAT disabled. Not yet verified on this CPU type.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data)
BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 523904) 0 entries of 256 used
Zone PFN ranges:
DMA             0 ->     4096
Normal       4096 ->   229376
HighMem    229376 ->   523904
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0:        0 ->   523904
On node 0 totalpages: 523904
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292227 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F69F0, 0014 (r0 PTLTD )
ACPI: RSDT 7FE81054, 0044 (r1 PTLTD    RSDT    6040000  LTP        0)
ACPI: FACP 7FE88E8A, 0074 (r1 INTEL  ALVISO    6040000 LOHR       5F)
ACPI: DSDT 7FE818CE, 75BC (r1 INTEL  ALVISO    6040000 MSFT  100000E)
ACPI: FACS 7FE99FC0, 0040
ACPI: APIC 7FE88EFE, 0066 (r1 INTEL  ALVISO    6040000 LOHR       5F)
ACPI: HPET 7FE88F64, 0038 (r1 INTEL  ALVISO    6040000 LOHR       5F)
ACPI: MCFG 7FE88F9C, 003C (r1 INTEL  ALVISO    6040000 LOHR       5F)
ACPI: BOOT 7FE88FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 7FE81489, 0235 (r1  PmRef  Cpu0Ist     3000 INTL 20030224)
ACPI: SSDT 7FE812B1, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030224)
ACPI: SSDT 7FE81098, 0219 (r1  PmRef    CpuPm     3000 INTL 20030224)
ACPI: DMI detected: Acer
ACPI: PM-Timer IO Port: 0×1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0×00] lapic_id[0×00] enabled)
ACPI: LAPIC_NMI (acpi_id[0×00] high edge lint[0×1])
ACPI: IOAPIC (id[0×01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0×02] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 255, address 0xfec20000, GSI 24-279
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 2 I/O APICs
ACPI: HPET id: 0×8086a201 base: 0×0 is invalid
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PERCPU: Allocating 41256 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519811
Kernel command line: BOOT_IMAGE=linux root=UUID=7917956b-9cbd-41a7-831a-5c615456b281  resume=UUID=59c95008-dcfa-403e-bbfd-fced2cc313d2 PROFILE=Maison splash=silent vga=791 combined_mode=libata
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fec20000)
Enabling fast FPU save and restore… done.
Enabling unmasked SIMD FPU exception support… done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1729.040 MHz processor.
Console: colour dummy device 80×25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2068716k/2095616k available (2446k kernel code, 25580k reserved, 1059k data, 312k init, 1178112k highmem)
virtual kernel memory layout:
fixmap  : 0xffe14000 - 0xfffff000   (1964 kB)
pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
.init : 0xc0475000 - 0xc04c3000   ( 312 kB)
.data : 0xc0363b16 - 0xc046ca40   (1059 kB)
.text : 0xc0100000 - 0xc0363b16   (2446 kB)
Checking if this processor honours the WP bit even in supervisor mode…Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3460.65 BogoMIPS (lpj=1730326)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking ‘hlt’ instruction… OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 19k freed
Early unpacking initramfs… done
Freeing initrd memory: 3918k freed
ACPI: Core revision 20080321
ACPI: Looking for DSDT in initramfs… error, file /DSDT.aml not found.
ENABLING IO-APIC IRQs
..TIMER: vector=0×31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (3460.65 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0
groups: 0
net_namespace: 660 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: EC: GPE = 0×1d, I/O: command/status = 0×66, data = 0×62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
system 00:04: ioport range 0×680-0×6ff has been reserved
system 00:04: ioport range 0×800-0×80f has been reserved
system 00:04: ioport range 0×1000-0×107f has been reserved
system 00:04: ioport range 0×1180-0×11bf has been reserved
system 00:04: ioport range 0×1600-0×167f has been reserved
PCI: region 0000:06:01.0/9 too large: 0×0000000000000000-0×0000000003ffffff
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: 0xc8100000-0xc81fffff
PREFETCH window: 0×00000000d0000000-0×00000000d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 7, cardbus bridge: 0000:06:01.0
IO window: 0×00004000-0×000040ff
IO window: 0×00004400-0×000044ff
MEM window: 0×88000000-0×8bffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: 0xc8200000-0xc82fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0×36 set to 0×1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1218158304.712:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1748
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 16384k
vesafb: mode is 1024×768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:ad8c
vesafb: pmi: set display start = c00cae1a, set palette = c00cae5a
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128×48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards…
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0×2f8 (irq = 3) is a NS16550A
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
brd: module loaded
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0×60,0×64 irq 1,12
serio: i8042 KBD port at 0×60,0×64 irq 1
serio: i8042 AUX port at 0×60,0×64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 312k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Switched to high resolution mode on CPU 0
SCSI subsystem initialized
Driver ’sd’ needs updating - please use bus_type methods
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26.1-desktop-1mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 ‘Open’ Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0×00001800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26.1-desktop-1mnb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0×00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0×126eb1, caps: 0xa04713/0×4000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26.1-desktop-1mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0×00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.26.1-desktop-1mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0×00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.26.1-desktop-1mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
ACPI: ACPI Dock Station Driver
usb 4-2: new low speed USB device using uhci_hcd and address 2
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0×1f0 ctl 0×3f6 bmdma 0×18c0 irq 14
ata2: PATA max UDMA/100 cmd 0×170 ctl 0×376 bmdma 0×18c8 irq 15
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: New USB device found, idVendor=046d, idProduct=c019
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Optical Mouse
usb 4-2: Manufacturer: Logitech
ata1.00: ATA-6: ST9160821A, 3.ALD, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.01: ATAPI: Optiarc DVD RW AD-7543A, 1-00, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: Direct-Access     ATA      ST9160821A       3.AL PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: CD-ROM            Optiarc  DVD RW AD-7543A  1-00 PQ: 0 ANSI: 5
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver wacom
wacom: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0×1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ACPI: WMI: Mapper loaded
Linux agpgart interface v0.103
Driver ’sr’ needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
NET: Registered protocol family 23
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0×164e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can’t get iobase of 0×2f8
nsc-ircc, Found chip at base=0×164e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can’t get iobase of 0×2f8
nsc-ircc 00:06: disabled
acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
acer-wmi: No or unsupported WMI interface, unable to load
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
usbcore: registered new interface driver hiddev
input: Logitech USB Optical Mouse as /class/input/input2
input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (71 C)
ACPI: AC Adapter [ACAD] (on-line)
ieee80211_crypt: registered algorithm ‘NULL’
tg3.c:v3.92.1 (June 9, 2008)
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 16 (level, low) -> IRQ 16
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:c0:9f:96:40:0f
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1e.2 to 64
input: Video Bus as /class/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: \_SB_.PCI0.PATA.PRID.BAY_: found ejectable bay
ACPI: \_SB_.PCI0.PATA.PRID.BAY_: Adding notify handler
ACPI: Error installing bay notify handler
intel8×0_measure_ac97_clock: measured 50893 usecs
intel8×0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1e.3 to 64
MC’97 0 converters and GPIO not ready (0×1)
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 17 (level, low) -> IRQ 17
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
firmware: requesting ipw2200-bss.fw
Marking TSC unstable due to: TSC halts in idle.
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
Yenta: CardBus bridge found at 0000:06:01.0 [1025:0066]
PCI: Bus 7, cardbus bridge: 0000:06:01.0
IO window: 0×00004000-0×000040ff
IO window: 0×00004400-0×000044ff
PREFETCH window: 0×8c000000-0×8c3fffff
MEM window: 0×88000000-0×8bffffff
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:01.0, mfunc 0×01c21b22, devctl 0×64
Yenta: ISA IRQ mask 0×0cf8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08
pcmcia: parent PCI bridge I/O window: 0×4000 - 0×4fff
cs: IO port probe 0×4000-0×4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
ACPI: PCI Interrupt 0000:06:01.2[A] -> GSI 18 (level, low) -> IRQ 18
Clocksource tsc unstable (delta = -296076140 ns)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[c8217000-c82177ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
cs: IO port probe 0×100-0×3af: clean.
cs: IO port probe 0×3e0-0×4ff: excluding 0×4d0-0×4d7
cs: IO port probe 0×820-0×8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
input: Acer hotkey driver as /class/input/input8
acerhk: request for accessing EC ignored
acerhk: Use of dritek keyboard extension not enabled, use module
acerhk: parameter usedritek=1 to do that (possibly dangerous)
Acer Travelmate hotkey driver v0.5.35
Non-volatile memory driver v1.2
ACPI: PCI Interrupt 0000:06:01.3[A] -> GSI 18 (level, low) -> IRQ 18
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00005097e8]
floppy0: no floppy controllers found
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: module loaded
Adding 4088500k swap on /dev/sda5.  Priority:-1 extents:1 across:4088500k
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
ADDRCONF(NETDEV_UP): eth0: link is not ready
ieee80211_crypt: registered algorithm ‘WEP’
ieee80211_crypt: registered algorithm ‘CCMP’
padlock: VIA PadLock not detected.
ieee80211_crypt: registered algorithm ‘TKIP’
eth1: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[drm] Initialized radeon 1.29.0 20080528 on minor 0
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ttyS1: LSR safety check engaged!
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
ip6_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
[drm] Setting GART location based on new memory map
[drm] Loading R400 Microcode
[drm] Num pipes: 2
[drm] writeback test succeeded in 1 usecs
synaptics: using relaxed packet validation
growisofs –version
* growisofs by , version 7.0,
front-ending to genisoimage: genisoimage 1.1.8 (Linux)
Linux epiche.littleboboy.net 2.6.26.1-desktop-1mnb #1 SMP Sat Aug 2 01:48:56 BRT 2008 i686 Intel(R) Pentium(R) M processor 1.73GHz GNU/Linux

En cherchant je ne sais plus quoi au sujet de mon acer 1692, je suis tombé sur ce site. Cela donne le script suivant librement adapté que je trouve fort utile

#!/usr/bin/env python

boxes = (
# type     adresse            user         pass
 (’imap’, ‘imap.littleboboy.net’, ‘login@littleboboy.net’, ‘pass’),
 )

import imaplib
got_mail = False

for srv in boxes:
 if srv[0].startswith(’imap’):
     if srv[0].endswith(’s’):
         M = imaplib.IMAP4_SSL(srv[1])
     else:
         M = imaplib.IMAP4(srv[1])
     M.login(srv[2], srv[3])
     M.select(’INBOX’,'readonly’)
     typ, data = M.search(None, ‘UNSEEN’)
     if data != ['’]:
        print data
        got_mail = True
        print “Got mail in : %s - %s” % (srv[1], ‘INBOX’)
     M.close()
     M.logout()
led = open(’/proc/driver/acerhk/led’, ‘w’)
led.write(’%d’ % got_mail)

Bon suite à la survenue de ceci j’ai procédé à la mise a jour des clés sur nephtys et osiris \o/.
J’ai également procédé à un changement vers une clé en rsa en lieu et place de la clé dsa utilisé précédemment
Reste désormais a tester notamment les diverses clés pem et autres certificats générés du temps du premier dédié parmenion (2004) qui sont normalement non impactées

Bon c’est désormais dovecot qui prend la place de maildrop en tant que MDA \o/
(reste a comprendre le fonctionnement du plugin sieve pour le mettre également en place)